The material and characteristics of the drill bit
Release time:
2020-10-17
【Summary】Process 1.1 Process ❶ According to the diameter and total length of the designed drill bit, you can choose either an alloy rod cutting machine or use wire cutting equipment for fixed-length processing. ❷ For the fixed-length cut rods, both ends can be flat-headed, which can be achieved on a manual tool grinding machine. ❸ Chamfering or drilling processing can be performed on the ground end faces of the alloy rods to prepare for grinding the outer diameter and shank of the drill bit, depending on whether the external cylindrical grinding fixture is a positive or negative center. ❹ Perform processing of the outer diameter of the drill bit, the clearance part, and the shank outer diameter on a high-precision external cylindrical grinding machine, ensuring that the external diameter's roundness, roundness jump, surface finish, and other design requirements are met. ❺ To improve processing efficiency on the CNC grinding machine, chamfer the tip of the drill bit on the alloy rod before the CNC grinding machine, for example, a 140° drill tip angle, and during chamfering, it can be roughly ground to 142°. ❻ After cleaning the chamfered alloy rod, transfer it to the CNC grinding process, where various parts of the drill bit are processed on a five-axis CNC grinding machine. ❼ If you need to improve the chip removal groove and outer roundness of the drill bit, you can also use a wool wheel and abrasive for polishing before or after the 5th step, but in this case, the drill bit will require more processing steps. ❽ For qualified processed drill bits, perform laser marking, which may include the company brand LOGO and drill bit specifications and dimensions. ❾ Pack the marked drill bits and send them to a professional tool coating company for coating. Note: 1. If opening the drill bit chip removal groove, whether spiral or straight groove, this step also includes negative chamfering of the peripheral edge; then process the drill tip cutting edge, including the drill tip tooth gap and the drill tip back angle; then process the peripheral edge back of the drill bit, grinding out a certain amount of drop to ensure that the external diameter part of the drill bit's peripheral edge contacts the workpiece hole wall at a certain ratio. 2. For the processing of negative chamfering of the drill tip cutting edge, it can be either CNC grinding or manual processing, depending on the different processes of each factory. 1.2 Processing Issues ❶ When processing the outer round part of the drill bit on the external cylindrical grinder, pay attention to whether the fixture is failing and ensure sufficient cooling of the alloy rod during processing, maintaining a good habit of measuring the outer diameter of the drill tip. ❷ When processing the drill bit on the CNC grinding machine, try to separate rough and fine processing into two steps during programming to avoid excessive grinding amounts that could cause potential thermal cracks, affecting the tool's service life. ❸ Use a reasonably designed material tray for tool handling to avoid damage to the cutting edge caused by mutual collisions between tools. ❹ For diamond grinding wheels that have turned black from grinding, use an oil stone for sharpening in a timely manner. Note: The processing technology varies based on the processed materials/equipment/working conditions. The above process arrangement only represents the author's personal opinion and is for technical exchange purposes only. Drill Bit Materials 2.1 High-Speed Steel High-speed steel (HSS) is a type of tool steel with high hardness, high wear resistance, and high heat resistance, also known as high-speed tool steel or sharp steel, commonly referred to as white steel. High-speed steel tools are tougher and easier to cut than ordinary tools. High-speed steel has better toughness, strength, and heat resistance than carbon tool steel, and the cutting speed is much higher than that of carbon tool steel (iron-carbon alloy), hence the name high-speed steel; while hard alloy steel has even better performance than high-speed steel, with cutting speeds that can be increased by 2-3 times. Characteristics High-speed steel can reach red hardness of 650 degrees. High-speed steel has good strength and toughness, and the cutting edge is sharp after grinding, with stable quality, generally used to manufacture small, complex-shaped tools. 2.2 Hard Alloy The main components of hard alloy drill bit material are tungsten carbide and cobalt, which account for 99% of all components, with 1% being other metals, hence it is called tungsten steel (hard alloy). Tungsten steel is a sintered composite material composed of at least one type of metal carbide. Common components of tungsten steel include tungsten carbide, cobalt carbide, niobium carbide, titanium carbide, and tantalum carbide. The grain size of the carbide components (or phases) is usually between 0.2-10 microns, and the carbide grains are bonded together using a metal binder. The binder metal is generally a ferrous metal, commonly cobalt or nickel. Thus, there are tungsten-cobalt alloys, tungsten-nickel alloys, and tungsten-titanium-cobalt alloys. The hard alloy drill bit material is formed by sintering, which involves pressing the powder into a blank, then heating it to a certain temperature (sintering temperature) in a sintering furnace, maintaining it for a certain time (holding time), and then cooling it down to obtain the desired performance of tungsten steel material. Characteristics: Hard alloy can reach red hardness of 800-1000 degrees. The cutting speed of hard alloy is 4-7 times higher than that of high-speed steel, with high cutting efficiency. The disadvantage is low bending strength, poor impact toughness, high brittleness, and low ability to withstand impact and vibration. Application Issues/Measures 3.1 Drill Tip Wear Causes: 1. The workpiece moves downward under the drilling force of the drill bit, and the drill bit rebounds after drilling through. 2. Insufficient rigidity of the machine tool. 3. The drill bit material is not strong enough. 4. Excessive runout of the drill bit. 5. Insufficient clamping rigidity, causing the drill bit to slide. Measures: 1. Reduce cutting speed. 2. Increase feed rate. 3. Adjust cooling direction (internal cooling). 4. Add a chamfer. 5. Check and adjust the coaxiality of the drill bit. 6. Check if the back angle is reasonable. 3.2 Chipping of the Cutting Edge Causes: 1. The workpiece moves downward under the drilling force of the drill bit, and the drill bit rebounds after drilling through. 2. Insufficient rigidity of the machine tool. 3. The drill bit material is not strong enough. 4. Excessive runout of the drill bit. 5. Insufficient clamping rigidity, causing the drill bit to slide. Measures: 1. Choose a drill bit with a larger back taper. 2. Check the runout range of the spindle drill bit (<0.02mm). 3. Use a pilot drill to make a starting hole. 4. Use a drill bit with stronger rigidity, such as hydraulic chucks with necked-down sleeves or heat-shrink kits. 3.3 Chip Buildup Causes: 1. Chemical reactions between the cutting material and the workpiece material (low carbon steel with high carbon content). Measures: 1. Improve the lubricant, increasing the oil or additive content. 2. Increase cutting speed and reduce feed rate to decrease contact time. 3. When drilling aluminum, use uncoated drill bits with surface polishing. 3.4 Broken Tool Causes: 1. The spiral groove of the drill bit is blocked by chips, preventing timely chip removal. 2. When drilling quickly, the feed rate is not reduced or switched from automatic to manual feed. 3. When drilling soft metals like brass, the back angle of the drill bit is too large, and the front angle is not ground, causing the drill bit to automatically rotate in. 4. The cutting edge is ground too sharp, leading to chipping without quickly retracting the tool. Measures: 1. Shorten the tool replacement cycle. 2. Improve installation and fixation, such as increasing support area and clamping force. 3. Check the spindle bearings and sliding grooves. 4. Use high-precision tool holders, such as hydraulic tool holders. 5. Use materials with higher toughness.
Material and Characteristics of Drill Bits
Process
1.1 Process
❶ According to the designed diameter and total length of the drill bit, choose either an alloy rod cutting machine or use wire cutting equipment for fixed-length processing.
❷ For the fixed-length cut rod, perform flat-end processing on both ends, which can be achieved on a manual tool grinding machine.
❸ Perform chamfering or drilling on the ground end face of the alloy rod to prepare for grinding the outer diameter and shank of the drill bit, depending on whether the external cylindrical grinding fixture is a positive or negative center.
❹ Process the outer diameter of the drill bit, the clearance part, and the shank outer diameter on a high-precision external cylindrical grinding machine, ensuring the design requirements for outer diameter cylindricity, roundness, surface finish, etc.
❺ To improve processing efficiency on a CNC grinding machine, chamfer the drill tip part on the alloy rod before the CNC grinding machine, for example, a 140° drill tip angle, and during chamfering, it can be roughly ground to 142°.
❻ After cleaning the chamfered alloy rod, transfer it to the CNC grinding process, and perform processing on various parts of the drill bit on a five-axis CNC grinding machine.
❼ If it is necessary to improve the chip removal groove and outer round finish of the drill bit, it can also be polished with a wool wheel and abrasive before or after the 5th process. Of course, in this case, the drill bit needs to be processed in more steps.
❽ For the qualified processed drill bits, perform laser marking, which may include the company Brand LOGO and drill bit Specification and Size information.
❾ Package the marked drill bits and then ship them to a professional tool coating company for coating.
Note:
1. If opening the chip removal groove of the drill bit, it can be either spiral or straight, this process also includes the negative chamfer of the peripheral edge; then process the drill tip cutting edge, including the drill tip tooth gap and the rear angle of the drill tip; next, process the back of the peripheral edge of the drill bit, grinding out a certain amount of drop to ensure that the outer diameter part of the drill bit's peripheral edge contacts the workpiece hole wall at a certain ratio.
2. For the processing of the negative chamfer of the drill tip cutting edge, it can be divided into CNC grinding processing or manual processing, which varies depending on the different processes of each factory.
1.2 Processing Issues
❶ When processing the outer round part of the drill bit on the external cylindrical grinder, pay attention to whether the fixture is failing and ensure sufficient cooling of the alloy rod during processing, maintaining a good habit of measuring the outer diameter size of the drill tip.
❷ When processing the drill bit on the CNC grinding machine, try to separate rough and fine processing into two steps during programming to avoid excessive grinding that may cause potential thermal cracks, affecting the tool's service life.
❸ Use a reasonably designed material tray for tool handling to avoid damage to the cutting edge caused by collisions between tools.
❹ For diamond grinding wheels that have turned black from grinding, use an oil stone in a timely manner for sharpening.
Note: The processing technology varies according to the processed materials/equipment/working conditions. The above process arrangement only represents the author's personal opinion and is for technical exchange purposes.
Drill Bit Materials
2.1 High-Speed Steel
High-speed steel (HSS) is a type of tool steel with high hardness, high wear resistance, and high heat resistance, also known as high-speed tool steel or sharp steel, commonly referred to as white steel.
High-speed steel tools are tougher and easier to cut than ordinary tools. High-speed steel has better toughness, strength, and heat resistance than carbon tool steel, and the cutting speed is much higher than that of carbon tool steel (iron-carbon alloy), hence the name high-speed steel; while carbide has even better performance than high-speed steel, with cutting speeds that can be increased by 2-3 times.
Characteristics
High-speed steel red hardness can reach 650 degrees.
High-speed steel has good strength and toughness, and the cutting edge is sharp after grinding, with stable quality, generally used to manufacture small and complex-shaped tools.
2.2 Carbide
Carbide drill bit material mainly consists of tungsten carbide and cobalt, which account for 99% of all components, with 1% being other metals, hence it is called tungsten steel (carbide). Tungsten steel is a sintered composite material composed of at least one metal carbide. Common components of tungsten steel include tungsten carbide, cobalt carbide, niobium carbide, titanium carbide, and tantalum carbide. The grain size of the carbide components (or phases) is usually between 0.2-10 microns, and the carbide grains are bonded together using a metal binder. The binder metal is generally a ferrous metal, commonly cobalt or nickel. This leads to tungsten-cobalt alloys, tungsten-nickel alloys, and tungsten-titanium-cobalt alloys. The carbide drill bit material is formed by sintering, which involves pressing the powder into a blank, then heating it in a sintering furnace to a certain temperature (sintering temperature) and maintaining it for a certain time (holding time), and then cooling it down to obtain the desired performance of tungsten steel material.
Characteristics:
Carbide red hardness can reach 800-1000 degrees.
Carbide cutting speed is 4-7 times higher than that of high-speed steel. High cutting efficiency.
The disadvantage is low bending strength, poor impact toughness, high brittleness, and low ability to withstand impact and vibration.
Application Issues/Measures
3.1 Drill Tip Wear
Causes:
1. The workpiece will move downward under the action of the drill bit's drilling force, and the drill bit will rebound after drilling through.
2. Insufficient rigidity of the machine tool.
3. The drill bit material is not strong enough.
4. The drill bit has too much runout.
5. The clamping rigidity is insufficient, causing the drill bit to slide.
Measures:
1. Reduce cutting speed.
2. Increase feed rate.
3. Adjust cooling direction (internal cooling).
4. Add a chamfer.
5. Check and adjust the coaxiality of the drill bit.
6. Check if the back angle is reasonable.
3.2 Chipping of the cutting edge.
Causes:
1. The workpiece will move downward under the action of the drill bit's drilling force, and the drill bit will rebound after drilling through.
2. Insufficient rigidity of the machine tool.
3. The drill bit material is not strong enough.
4. The drill bit has too much runout.
5. The clamping rigidity is insufficient, causing the drill bit to slide.
Measures:
1. Choose a drill bit with a larger back taper.
2. Check the spindle drill bit runout range (<0.02mm).
3. Use a pilot drill to make the top hole.
4. Use a drill bit with stronger rigidity, with a necked sleeve or a heat-shrink kit hydraulic chuck.
3.3 Built-up edge.
Causes:
1. Caused by chemical reactions between the cutting material and the workpiece material (low carbon steel with a higher carbon content).
Measures:
1. Improve the lubricant, increase the oil or additive content.
2. Increase cutting speed, reduce feed rate to decrease contact time.
3. If drilling aluminum, use a surface-polished uncoated drill bit.
3.4 Broken tool.
Causes:
1. The spiral groove of the drill bit is blocked by chips, and the chips are not discharged in time.
2. When drilling quickly, the feed rate was not reduced or the operation was not switched from automatic to manual.
3. When drilling soft metals like brass, the back angle of the drill bit is too large, and the front angle has not been ground, causing the drill bit to automatically rotate in.
4. The cutting edge is sharpened too much, causing chipping, and the tool was not retracted quickly.
Measures:
1. Shorten the tool replacement cycle.
2. Improve installation and fixation, such as increasing support area and clamping force.
3. Check the spindle bearings and sliding grooves.
4. Use high-precision tool holders, such as hydraulic tool holders.
5. Use materials with higher toughness.
TAG:
RELATED INFORMATION
FAX
ADD
Gengguantun Industrial Development Zone, Qingxian County, Hebei Province, China
WeChat applet