The drawing method of part diagrams in CNC machining
Release time:
2020-12-13
【Summary】When designing and surveying machines or components, part drawings must be created. The accuracy of the part drawings directly affects the performance of the machines or components. This section introduces the general methods for drawing part drawings. 1. Analyze the part and determine the expression scheme Before drawing, it is necessary to understand the name, function, and its position and assembly connection relationship in the machine or component. Based on understanding the structural shape of the part, combined with its working position and processing position, determine which of the four typical parts (sleeve, cover, fork frame, box type) it belongs to, and then determine a suitable expression scheme based on the expression characteristics of this type of part. When selecting the expression scheme, the following two points should be noted: 1. The number of views should be appropriate Efforts should be made to minimize the use of dashed lines in the views and to appropriately use a small number of dashed lines, striving for simplicity while clearly expressing the shapes of various parts of the component, with the number of views being just right and avoiding repetitive expressions as much as possible. 2. The expression method should be appropriate Based on the internal and external structural shapes of the part, each view should have its focus and purpose, and the expression of the main structure and local structure should be clear. At the same time, the reasonable layout of the graphics should be considered, such as the basic views being configured in accordance with regulations. 2. Draw the part sketch The part sketch is a hand-drawn part drawing, which is an important basis for drawing part drawings and assembly drawings during component surveying. When drawing the part sketch, it is required to visually estimate the size of the part, determine the drawing scale, and draw it by hand. The general steps are as follows: 1. Understand and analyze the part, determine the expression scheme Based on the size, complexity, and expression scheme of the part, determine the appropriate drawing scale and drawing size. It is best to use graph paper for sketching. 2. Draw the frame line and title block, and determine the position lines of the main views, such as the main axis line, center line, and drawing reference line. 3. Visually draw by hand. First, draw the outline of the main structure, then draw the outline of the secondary structure. The relevant views of each structure should be drawn in relation to each other to conform to projection characteristics. At the junction of adjacent structures, consider the addition and subtraction of lines (e.g., intersection points have intersection lines, tangent points have no lines, etc.). Finally, complete all graphics. 4. Check and correct the entire drawing, erase unnecessary lines; determine the size reference in three directions, draw all dimension boundary lines, dimension lines, and dimension arrows; draw section lines. 5. Measure and determine all dimensions. For standard structures (such as key slots, chamfers, etc.), consult relevant manuals or perform calculations before filling in. 6. Write necessary technical requirements, fill in the title block, and complete the part sketch. 3. Draw the part working drawing Based on the completed part sketch, combined with the actual production situation and processing technology experience, first conduct a comprehensive verification of the part sketch, and then draw the part drawing. When verifying the sketch, several issues are usually noted, such as: whether the expression scheme is reasonable and complete, whether the dimension annotations are clear, complete, correct, and reasonable, and whether the proposed technical requirements can meet both the process requirements and the performance requirements of the part. After verifying and correcting the sketch, begin drawing the part working drawing. The steps for drawing the part working drawing are as follows: 1. Analyze the part and select the expression scheme. 2. Determine the drawing scale and drawing size, draw the frame line, and the positioning lines of the main views. 3. Draw the base drawing. 4. Check and correct the base drawing, deepen all graphics after confirming there are no errors, and draw section lines. 5. Draw dimension boundary lines, dimension lines, and dimension arrows, and write dimension values and technical requirements. 6. Fill in the title block, verify, and complete the part working drawing.
Drawing Methods for Part Diagrams in CNC Machining
TAG:
RELATED INFORMATION
FAX
ADD
Gengguantun Industrial Development Zone, Qingxian County, Hebei Province, China
WeChat applet