What to do if the processing accuracy is unstable?
Release time:
2021-01-06
【Summary】The design of tooling fixtures is generally carried out after the machining process of the parts has been established, according to the specific requirements of a certain process. When formulating the process, the feasibility of the fixture should be fully considered, and if necessary, suggestions for modifications to the process can be made during the design of the tooling fixture. The quality of the design of the tooling fixture should be measured by its ability to stably ensure the processing quality of the workpiece, high production efficiency, low cost, convenient chip removal, safe and labor-saving operation, and ease of manufacturing and maintenance. 1. Basic Principles of Tooling Fixture Design 1. Meet the stability and reliability of workpiece positioning during use; 2. Have sufficient bearing or clamping force to ensure the processing of the workpiece on the tooling fixture; 3. Ensure simple and quick operation during clamping; 4. Easily worn parts must be of a structure that can be quickly replaced, preferably without the need for other tools when conditions permit; 5. Ensure the reliability of repeated positioning during adjustment or replacement of the fixture; 6. Avoid complex structures and high costs as much as possible; 7. Preferably use standard parts as components; 8. Form a systematic and standardized internal product structure within the company. 2. Basic Knowledge of Tooling Fixture Design A good machine tool fixture must meet the following basic requirements: 1. Ensure the processing accuracy of the workpiece. The key to ensuring processing accuracy lies in correctly selecting the positioning reference, positioning method, and positioning elements. If necessary, a positioning error analysis should be conducted, and attention should be paid to the impact of the structure of other components in the fixture on processing accuracy, ensuring that the fixture meets the processing accuracy requirements of the workpiece. 2. Improve production efficiency. The complexity of special fixtures should be adapted to the production capacity. Various quick and efficient clamping mechanisms should be used as much as possible to ensure ease of operation, shorten auxiliary time, and improve production efficiency. 3. Good process performance. The structure of special fixtures should strive to be simple and reasonable, facilitating manufacturing, assembly, adjustment, inspection, and maintenance. 4. Good usability. Tooling fixtures should have sufficient strength and rigidity, and operation should be simple, labor-saving, and reliable. Under objective conditions and economic applicability, mechanical clamping devices such as pneumatic and hydraulic should be used as much as possible to reduce the labor intensity of the operator. Tooling fixtures should also facilitate chip removal. If necessary, a chip removal structure can be set up to prevent chips from damaging the positioning of the workpiece and damaging the tool, and to prevent chip accumulation from generating excessive heat that causes deformation of the process system. 5. Good economy. Special fixtures should use standard components and standard structures as much as possible, striving for simple structures and easy manufacturing to reduce the manufacturing cost of the fixture. Therefore, during the design process, a necessary technical and economic analysis of the fixture scheme should be conducted based on orders and production capacity to improve the economic benefits of the fixture in production. 3. Overview of Standardization in Tooling Fixture Design 1. Basic methods and steps of tooling fixture design Preparation before design. The original data for tooling fixture design includes the following content: a) Design notification, finished product drawings, blank drawings, and process routes, etc., to understand the processing technical requirements of each process, positioning and clamping schemes, processing content of previous processes, blank conditions, machine tools, tools, and inspection measuring tools used in processing, processing allowances, and cutting amounts, etc.; b) Understand the production batch and the need for fixtures; c) Understand the main technical parameters, performance, specifications, accuracy of the machine tools used, and the connection dimensions of the fixture; d) Inventory status of standard materials for fixtures. 2. Issues to consider in tooling fixture design Fixture design generally has a simple structure, giving the impression that the structure is not very complex, especially with the prevalence of hydraulic fixtures, which greatly simplifies the original mechanical structure. However, if detailed consideration is not given during the design process, unnecessary troubles will inevitably arise: a) The blank allowance of the processed part. If the blank size is too large, interference will occur. Therefore, a blank drawing must be prepared before design, leaving enough space. b) The smoothness of chip removal in the fixture. Due to the limited processing space of the machine tool, fixtures are often designed to be compact, which may overlook the accumulation of chips in the dead corners of the fixture during the processing, including the poor outflow of cutting fluid, causing many troubles in subsequent processing. Therefore, issues that may arise during processing should be considered from the beginning, as fixtures are designed to improve efficiency and facilitate operation. c) The overall openness of the fixture. Neglecting openness can make it difficult for operators to load and unload, wasting time and effort, which is a major design taboo. d) The basic theoretical principles of fixture design. Each fixture undergoes countless clamping and releasing actions, so it may initially meet user requirements, but the fixture should maintain its precision. Therefore, do not design things that contradict principles. Even if it works at the moment, it will not have long-term sustainability. A good design should withstand the test of time. e) The replaceability of positioning elements. Positioning elements wear out severely, so quick and convenient replacement should be considered. It is best not to design them as large parts. Accumulating experience in fixture design is important. Sometimes design is one thing, and practical application is another, so good design is a process of continuous accumulation and summarization. Commonly used tooling fixtures are mainly divided into the following types based on functionality: 01 Clamping Molds 02 Drilling and Milling Fixtures 03 CNC and Instrument Chucks 04 Air Testing and Water Testing Fixtures 05 Punching and Shearing Fixtures 06 Welding Fixtures 07 Polishing Jigs 08 Assembly Fixtures 09 Transfer Printing and Laser Engraving Fixtures 01 Clamping Molds Definition: Tools for clamping and positioning based on the product's external shape. Design Points: 1. This type of clamping mold is mainly used on a vise, and its length can be cut according to needs; 2. Other auxiliary positioning devices can be designed on the clamping mold, generally connected by welding; 3. The above is a simplified diagram, and the mold cavity structure dimensions are determined by specific conditions; 4. A positioning pin with a diameter of 12 should be tightly fitted at an appropriate position on the moving mold, and the positioning hole at the corresponding position of the fixed mold should be a sliding fit with the positioning pin; 5. The assembly cavity should be designed to be enlarged by 0.1mm based on the outer shape of the non-shrinking blank drawing. 02 Drilling and Milling Fixtures Design Points: 1. If necessary, some auxiliary positioning devices can be designed on the fixed core and its fixed plate; 2. The above is a structural diagram, and the actual situation needs to be designed according to the product structure; 3. The cylinder is determined based on the product size and the force situation during processing, commonly using SDA50X50; 03 CNC and Instrument Chucks A. CNC Chucks Internal Collet Chucks Design Points: 1. The dimensions not marked in the above diagram are based on the actual internal hole size structure of the product; 2. The outer circle that contacts the internal hole positioning of the product should leave a single-sided allowance of 0.5mm during production, and it should be finely turned to size after being installed on the CNC machine to prevent deformation and eccentricity caused by the quenching process; 3. The material for the assembly part is recommended to use spring steel, and the pull rod part is 45#; 4. The thread of the pull rod part is M20, which is a commonly used thread and can be adjusted according to actual conditions. Instrument Internal Collet Chucks Design Points: 1. The above is a reference diagram, and the assembly dimensions and structure are based on the actual external dimensions of the product; 2. The material used is 45#, and it is subjected to quenching treatment. Instrument External Collet Chucks Design Points: 1. The above is a reference diagram, and the actual dimensions are based on the internal hole size structure of the product; 2. The outer circle that contacts the internal hole positioning of the product should leave a single-sided allowance of 0.5mm during production, and it should be finely turned to size after being installed on the instrument lathe to prevent deformation and eccentricity caused by the quenching process; 3. The material used is 45#, and it is subjected to quenching treatment. 04 Air Testing Fixtures Design Points: 1. The above is a reference diagram for air testing fixtures, and the specific structure should be designed based on the actual structure of the product. The idea is to seal the product in the simplest way possible, allowing the part that needs to be tested for sealing to be filled with gas to confirm its sealing performance; 2. The size of the cylinder can be adjusted according to the actual size of the product, and it should also consider whether the stroke of the cylinder can facilitate the loading and unloading of the product; 3. The sealing surface that contacts the product generally uses materials with good compressibility, such as polyurethane and NBR rubber rings. At the same time, if there are positioning blocks that contact the product's appearance, it is best to use white plastic blocks and cover them with cotton cloth during use to prevent damage to the product's appearance; 4. The design should consider the positioning direction of the product to prevent internal leakage of gas from being trapped inside the product cavity, leading to misdetection. 05 Punching Fixtures Design Points: The above is a common structure for punching fixtures. The base plate serves to facilitate fixing on the workbench of the punching machine; the positioning block serves to fix the product, and the specific structure is designed according to the actual situation of the product, with the center point arranged to facilitate safe loading and unloading of the product; the baffle serves to facilitate the product's separation from the punch; the pillar serves to fix the baffle. The assembly positions and dimensions of the above parts can be designed according to the actual situation of the product. 06 Welding Fixtures Welding fixtures mainly serve to fix the positions of various components in the welding assembly and control the relative dimensions of the components in the welding assembly. Their structure mainly consists of positioning blocks, which need to be designed according to the actual structure of the product. It is worth noting that when the product is placed on the welding fixture, there should be no sealed space generated between the fixtures to prevent excessive pressure in the sealed space during the welding heating process, affecting the dimensions of the components after welding. 07 Polishing Jigs 08 Assembly Fixtures Assembly fixtures are mainly used as auxiliary positioning devices during the assembly process of components. The design idea is to facilitate the loading and unloading of products based on the structure of the component assembly, ensuring that the product's appearance surface is not damaged during the assembly process, and allowing cotton cloth to be used to protect the product during use. In terms of material selection, non-metallic materials such as white glue should be used as much as possible. 09 Transfer Printing and Laser Engraving Fixtures Design Points: The positioning structure of the fixture should be designed according to the engraving requirements of the product's actual situation, paying attention to the convenience of loading and unloading the product and protecting the product's appearance. Positioning blocks and auxiliary positioning devices that contact the product should preferably use non-metallic materials such as white glue.
What to do if the processing accuracy is unstable
The design of tooling fixtures is generally carried out according to the specific requirements of a certain process after the mechanical processing technology process of the parts has been formulated. When formulating the process, the feasibility of the fixture should be fully considered, and if necessary, suggestions for modifying the process can also be made during the design of the tooling fixture. The quality of the design of the tooling fixture should be measured by whether it can stably guarantee the processing quality of the workpiece, high production efficiency, low cost, convenient chip removal, safe and labor-saving operation, and ease of manufacturing and maintenance.
I. Basic Principles of Tooling Fixture Design
1. Meet the stability and reliability of workpiece positioning during use;
2. Have sufficient bearing or clamping force to ensure the processing of the workpiece on the tooling fixture;
3. Meet the simplicity and speed of operation during clamping;
4. Easily worn parts must be of a structure that can be quickly replaced, preferably without the need for other tools when conditions permit;
5. Meet the reliability of repeated positioning during adjustment or replacement of the fixture;
6. Avoid complex structures and high costs as much as possible;
7. Preferably use standard parts as components;
8. Form a systematic and standardized internal product within the company.
II. Basic Knowledge of Tooling Fixture Design
A good machine tool fixture must meet the following basic requirements:
1. Ensure the processing accuracy of the workpiece. The key to ensuring processing accuracy lies in correctly selecting the positioning reference, positioning method, and positioning elements. If necessary, positioning error analysis should also be conducted, and attention should be paid to the impact of the structure of other components in the fixture on processing accuracy, ensuring that the fixture can meet the processing accuracy requirements of the workpiece.
2. Improve production efficiency. The complexity of special fixtures should be adapted to the production capacity situation, and various quick and efficient clamping mechanisms should be used as much as possible to ensure convenient operation, shorten auxiliary time, and improve production efficiency.
3. Good process performance. The structure of special fixtures should strive to be simple and reasonable, facilitating manufacturing, assembly, adjustment, inspection, maintenance, etc.
4. Good usability. Tooling fixtures should have sufficient strength and rigidity, and operation should be simple, labor-saving, and safe and reliable. Under the premise of objective conditions allowing and being economically applicable, mechanical clamping devices such as pneumatic and hydraulic should be used as much as possible to reduce the labor intensity of the operator. Tooling fixtures should also facilitate chip removal. If necessary, chip removal structures can be set up to prevent chips from damaging the positioning of the workpiece and damaging the tool, and to prevent the accumulation of chips from generating a lot of heat, causing deformation of the process system.
5. Good economy. Special fixtures should use standard components and standard structures as much as possible, striving for simple structures and easy manufacturing to reduce the manufacturing cost of the fixtures. Therefore, during the design, necessary technical and economic analysis of the fixture scheme should be conducted based on orders and production capacity to improve the economic benefits of the fixtures in production.
III. Overview of Standardization in Tooling Fixture Design
1. Basic methods and steps of tooling fixture design
Preparation before design. The original data for tooling fixture design includes the following content:
a) Design notification, finished product drawings of parts, blank drawings, and technical data such as process routes, understanding the processing technical requirements of each process, positioning and clamping schemes, processing content of previous processes, blank conditions, machine tools, tools, and inspection measuring tools used in processing, processing allowances, and cutting amounts, etc.;
b) Understand the production batch and the demand for fixtures;
c) Understand the main technical parameters, performance, specifications, accuracy of the machine tools used, and the connection dimensions of the fixture structure;
d) Inventory status of standard materials for fixtures.
2. Issues to consider in tooling fixture design
Fixture design generally has a simple structure, giving the impression that the structure is not very complex, especially with the prevalence of hydraulic fixtures, which greatly simplifies the original mechanical structure. However, if detailed consideration is not given during the design process, unnecessary troubles will inevitably arise:
a) The blank allowance of the workpiece. If the blank size is too large, it will cause interference. Therefore, it is essential to prepare the blank drawing before design. Leave enough space.
b) The smoothness of chip removal in the fixture. Due to the limited processing space of the machine tool, the fixture is often designed to be compact, which may overlook the accumulation of chips in the dead corners of the fixture during the processing, including the poor outflow of cutting fluid, causing many troubles for subsequent processing. Therefore, issues that may arise during processing should be considered from the very beginning, as the fixture is fundamentally aimed at improving efficiency and facilitating operation.
c) The overall openness of the fixture. Ignoring openness can make it difficult for operators to load and unload, wasting time and effort, which is a major design taboo.
d) The basic theoretical principles of fixture design. Each fixture must undergo countless clamping and releasing actions, so it may initially meet user requirements, but the fixture should have its precision retention. Therefore, do not design things that contradict principles. Even if it works by chance at the moment, it will not have long-lasting sustainability. A good design should withstand the test of time.
e) The replaceability of positioning elements. Positioning elements wear out severely, so quick and convenient replacement should be considered. It is best not to design them as large components.
The accumulation of design experience in fixtures is very important. Sometimes design is one thing, and practical application is another, so good design is a process of continuous accumulation and summarization.
Commonly used tooling fixtures are mainly divided into the following types based on functionality:
01 Fixture
02 Drilling and Milling Tooling
03 CNC and Instrument Collet
04 Air and Water Testing Tooling
05 Edge Cutting and Punching Tooling
06 Welding Tooling
07 Polishing Fixture
08 Assembly Tooling
09 Transfer Printing, Laser Engraving Tooling
01 Fixture
Definition: A tool for positioning and clamping based on the product's shape.
Design Points:
1. This type of clamp is mainly used on a vise, and its length can be cut as needed;
2. Other auxiliary positioning devices can be designed on the clamp, generally connected by welding;
3. The above image is a schematic, the cavity structure dimensions are determined by specific conditions;
4. A positioning pin with a diameter of 12 should be tightly fitted at an appropriate position on the moving mold, and the corresponding positioning hole on the fixed mold should be a sliding fit with the positioning pin;
5. The assembly cavity should be designed to offset and enlarge by 0.1mm based on the outer shape of the non-shrinking blank drawing.
02 Drilling and Milling Tooling
Design Points:
1. If necessary, some auxiliary positioning devices can be designed on the fixed core and its fixed plate;
2. The above image is a structural schematic, the actual situation needs to be designed according to the product structure;
3. The cylinder size is determined by the product size and the stress situation during processing, commonly used is SDA50X50;
03 CNC and Instrument Collet
A CNC Collet
Inner Conical Collet
Design Points:
1. The dimensions not marked in the above image are based on the actual product's inner hole size structure;
2. The outer circle that contacts the product's inner hole should leave a margin of 0.5mm on one side during production, and finally be precision turned to size on the CNC machine to prevent deformation and eccentricity caused by the quenching process;
3. The material for the assembly part is recommended to use spring steel, and the pull rod part is 45#;
4. The thread M20 for the pull rod part is a commonly used thread, which can be adjusted according to the actual situation.
Instrument Inner Conical Collet
Design Points:
1. The above image is a reference diagram, the assembly dimensions and structure are determined by the actual product's outer shape dimensions;
2. The material used is 45#, with quenching treatment.
Instrument Outer Conical Collet
Design Points:
1. The above image is a reference diagram, the actual dimensions are determined by the product's inner hole size structure;
2. The outer circle that contacts the product's inner hole should leave a margin of 0.5mm on one side during production, and finally be precision turned to size on the instrument lathe to prevent deformation and eccentricity caused by the quenching process;
3. The material used is 45#, with quenching treatment.
04 Gas Testing Tool
Design Points:
1. The above image is a reference diagram for the gas testing tool, the specific structure needs to be designed according to the actual structure of the product, the idea is to seal the product in the simplest way possible, allowing the part that needs to be tested for sealing to be filled with gas to confirm its sealing performance;
2. The size of the cylinder can be adjusted according to the actual size of the product, and it is also necessary to consider whether the cylinder's stroke can facilitate the easy placement and removal of the product;
3. The sealing surface that contacts the product generally uses materials with good compressibility, such as polyurethane and NBR rubber rings, and it is important to use white plastic blocks for positioning blocks that contact the product's appearance, covering them with cotton cloth during use to prevent damage to the product's appearance;
4. The design should consider the product's positioning direction to prevent trapped gas from leaking inside the product cavity, leading to false detection.
05 Punching Tool
Design Points: The above image shows the common structure of a punching tool. The base plate serves to facilitate fixing on the punch press's workbench; the positioning block serves to fix the product, and the specific structure is designed according to the actual situation of the product, with the center point arranged to facilitate safe placement and removal of the product; the baffle serves to facilitate the product's separation from the punch; the pillar serves to fix the baffle. The assembly positions and dimensions of the above parts can be designed according to the actual situation of the product.
06 Welding Tooling
The welding fixture mainly serves to fix the positions of various components in the welding assembly, controlling the relative dimensions of the components in the welding assembly. Its structure mainly consists of positioning blocks, which need to be designed according to the actual structure of the product. It is important to note that when the product is placed on the welding fixture, there should be no sealing space created between the fixtures to prevent excessive pressure in the sealing space during the welding heating process, which could affect the dimensions of the components after welding.
07 Polishing Fixture
08 Assembly Tooling
The assembly tooling is mainly used as an auxiliary positioning device during the assembly process of components. Its design idea is to facilitate the easy placement and removal of products based on the structure of the component assembly, ensuring that the product's appearance is not damaged during the assembly process, and allowing for cotton cloth to be used to protect the product during use. In terms of material selection, non-metallic materials such as white glue should be used as much as possible.
09 Transfer Printing, Laser Engraving Tooling
Design Points: The positioning structure of the tooling should be designed according to the engraving requirements of the actual product, paying attention to the convenience of product placement and removal, and the protection of the product's appearance. Positioning blocks and auxiliary positioning devices that contact the product should preferably use non-metallic materials such as white glue.
TAG:
RELATED INFORMATION
FAX
ADD
Gengguantun Industrial Development Zone, Qingxian County, Hebei Province, China
WeChat applet