The reason for the thread breakage


Release time:

2021-01-13

【Summary】1. Poor quality of taps Main materials, tool design, heat treatment conditions, processing accuracy, coating quality, etc. For example, if the size difference at the transition of the tap cross-section is too large or there is no designed transition radius, it leads to stress concentration, making it easy to break at the stress concentration during use. If the distance from the cross-section transition at the junction of the shank and the cutting edge is too close to the weld, it causes complex welding stress to overlap with the stress concentration at the cross-section transition, resulting in significant stress concentration, leading to the tap breaking during use. 2. Improper selection of taps For workpieces with too high hardness, high-quality taps should be selected, such as cobalt high-speed steel taps, carbide taps, coated taps, etc. In addition, different tap designs are applied in different working conditions. For example, the number, size, and angle of the chip removal grooves of the tap all affect chip removal performance. 3. Mismatch between the tap and the processed material This issue has received increasing attention in recent years. Previously, domestic manufacturers always thought that imported products were better and more expensive, but actually, suitable products are the best. With the continuous increase of new materials and difficult-to-process materials, the variety of tool materials is also constantly increasing to meet this need. Therefore, it is necessary to choose the appropriate tap product before tapping. 4. The diameter of the bottom hole is too small For example, when processing black metal materials with M5×0.5 threads, a cutting tap should use a 4.5mm diameter drill bit to create the bottom hole. If a 4.2mm drill bit is mistakenly used, the part that the tap needs to cut will inevitably increase, leading to the tap breaking. It is recommended to choose the correct bottom hole diameter based on the type of tap and the material of the workpiece. If there is no perfectly matching drill bit, a larger size can be chosen. 5. Issues with the material of the workpiece The material of the workpiece is impure, with local hard spots or air holes, causing the tap to lose balance and break instantly. 6. The machine tool does not meet the precision requirements of the tap The machine tool and the clamping body are also very important, especially for high-quality taps. Only machine tools and clamping bodies with certain precision can bring out the performance of the taps. A common issue is insufficient concentricity. At the start of tapping, if the tap's initial positioning is incorrect, meaning the spindle axis is not concentric with the centerline of the bottom hole, excessive torque occurs during tapping, which is a major reason for tap breakage. 7. Poor quality of cutting fluid and lubricating oil Many domestic companies have begun to pay attention to this issue. Many companies that have purchased foreign tools and machine tools have profound experiences. Problems with the quality of cutting fluid and lubricating oil can easily lead to burrs and other defects in the processed products, while also significantly reducing their lifespan. 8. Unreasonable cutting speed and feed rate When processing issues arise, most domestic users reduce the cutting speed and decrease the feed rate. This reduces the pushing force of the tap, significantly lowering the precision of the threads produced, increasing the roughness of the thread surface, and making it impossible to control the thread diameter and precision, leading to unavoidable issues like burrs. However, if the feed rate is too fast, excessive torque can also easily lead to tap breakage. The cutting speed during machining is generally 6-15m/min for steel materials; 5-10m/min for tempered steel or harder steel materials; 2-7m/min for stainless steel; and 8-10m/min for cast iron. For the same material, a smaller tap diameter should take a higher value, while a larger tap diameter should take a lower value. 9. The skills and techniques of the operators do not meet the requirements All of the above issues require operators to make judgments or provide feedback to technical personnel, but currently, the vast majority of operators in the country do not pay enough attention. For example, when processing blind hole threads, at the moment the tap is about to contact the bottom of the hole, the operator may not realize it and continues to feed at the tapping speed as if it has not reached the bottom, or forces the feed when chip removal is not smooth, leading to tap breakage. It is recommended that operators strengthen their sense of responsibility.

                                      The reason for tap breakage

1. Poor quality of the tap

Main materials, tool design, heat treatment conditions, processing accuracy, coating quality, etc. For example, if the size difference at the transition of the tap cross-section is too large or there is no designed transition radius, it leads to stress concentration, which is prone to breakage at the stress concentration during use. If the distance from the cross-section transition at the junction of the shank and the cutting edge is too close to the weld, it results in complex welding stress overlapping with the stress concentration at the cross-section transition, generating significant stress concentration, leading to tap breakage during use.

2. Improper selection of the tap

For workpieces with excessive hardness, high-quality taps should be selected, such as cobalt high-speed steel taps, carbide taps, coated taps, etc. In addition, different tap designs are applied in different working conditions. For example, the number, size, and angle of the chip flutes of the tap all affect chip removal performance.

3. Mismatch between the tap and the processed material

This issue has received increasing attention in recent years. Previously, domestic manufacturers always thought that imported products were better and more expensive, but in fact, suitable products are the best. With the continuous increase of new materials and difficult-to-process materials, the variety of tool materials is also constantly increasing to meet this demand. Therefore, it is necessary to select suitable tap products before tapping.

4. The diameter of the bottom hole is too small

For example, when processing M5×0.5 threads in black metal materials, a cutting tap should use a 4.5mm drill bit for the bottom hole. If a 4.2mm drill bit is mistakenly used, the cutting portion required by the tap will inevitably increase during tapping, leading to tap breakage. It is recommended to choose the correct bottom hole diameter based on the type of tap and the material of the workpiece. If there is no perfectly matching drill bit, a larger size can be chosen.

5. Issues with the workpiece material

The workpiece material is impure, with local hard spots or air holes, causing the tap to lose balance and break instantly.

6. The machine tool does not meet the precision requirements of the tap

The machine tool and the clamping body are also very important, especially for high-quality taps. Only machine tools and clamping bodies with certain precision can bring out the performance of the taps. A common issue is insufficient concentricity. At the start of tapping, if the tap's initial positioning is incorrect, meaning the spindle axis is not concentric with the centerline of the bottom hole, excessive torque occurs during tapping, which is the main reason for tap breakage.

7. Poor quality of cutting fluid and lubricating oil

Many domestic enterprises have begun to pay attention to this issue. Many companies that have purchased foreign tools and machine tools have profound experiences. Problems with the quality of cutting fluid and lubricating oil can easily lead to burrs and other defects in the processed products, while also significantly reducing their lifespan.

8. Unreasonable cutting speed and feed rate

When processing issues arise, most domestic users reduce the cutting speed and decrease the feed rate. This reduces the pushing force of the tap, significantly lowering the precision of the produced threads, increasing the roughness of the thread surface, and making it impossible to control the thread diameter and precision, leading to burrs and other issues. However, if the feed rate is too fast, excessive torque can also easily lead to tap breakage. The cutting speed during machining is generally 6-15m/min for steel materials; 5-10m/min for tempered steel or harder steel materials; 2-7m/min for stainless steel; and 8-10m/min for cast iron. For the same material, a smaller tap diameter should take the higher value, while a larger tap diameter should take the lower value.

9. The skills and techniques of the operator do not meet the requirements

All of the above issues require operators to make judgments or provide feedback to technical personnel, but currently, most domestic operators do not pay enough attention. For example, when processing blind hole threads, when the tap is about to touch the bottom of the hole, the operator may not realize it and continues to feed at the tapping speed as if it has not reached the bottom, or forces the feed when chip removal is not smooth, leading to tap breakage. It is recommended that operators strengthen their sense of responsibility.

TAG:


RELATED INFORMATION

ADD

Gengguantun Industrial Development Zone, Qingxian County, Hebei Province, China

WeChat applet

WeChat applet

Business License