Hand grinding skills of a twist drill


Release time:

2021-05-11

【Summary】Twist drills are a commonly used drilling tool. Although their structure is simple, properly sharpening them is not an easy task. The key lies in mastering the sharpening methods and techniques. Once the methods are understood, the problems will be easily resolved. Here, I will introduce some manual sharpening techniques for twist drills. The tip angle of a twist drill is generally 118°, but it can also be considered as 120°. The main techniques for sharpening drill bits are as follows: 1. The cutting edge must be level with the grinding wheel surface. Before sharpening the drill bit, the main cutting edge of the drill bit should be placed on the same horizontal plane as the grinding wheel surface, which means ensuring that when the cutting edge contacts the grinding wheel, the entire edge is ground. This is the first step in positioning the drill bit relative to the grinding wheel; once positioned correctly, slowly approach the grinding wheel surface. 2. The drill bit axis should be angled out at 60° to the grinding wheel surface. This angle is the cutting angle of the drill bit. If this angle is incorrect, it will directly affect the size of the drill bit's tip angle and the shape of the main cutting edge and the side cutting angle. This refers to the positional relationship between the drill bit's axis and the surface of the grinding wheel; an angle of 60° is generally easy to gauge. It is important to pay attention to both the relative horizontal position and angle position of the drill bit before sharpening; both must be considered together. Do not neglect the angle for the sake of leveling the cutting edge, or vice versa. 3. Grind from the cutting edge towards the back. After the cutting edge contacts the grinding wheel, start grinding from the main cutting edge towards the back, meaning that the contact with the grinding wheel should begin at the cutting edge and then slowly grind down along the entire back cutting surface. When the drill bit enters, it can lightly touch the grinding wheel, starting with a small amount of grinding, and pay attention to the uniformity of the sparks, adjusting the pressure on your hands in a timely manner. Also, be mindful of cooling the drill bit; do not let it overheat, which can cause discoloration of the cutting edge and lead to annealing. If the temperature of the cutting edge is high, cool the drill bit promptly. 4. The cutting edge should move up and down, and the tail of the drill bit should not lift. This is a standard grinding action for drill bits; the main cutting edge should move up and down on the grinding wheel, meaning that the hand holding the front part of the drill bit should evenly move the drill bit up and down on the grinding wheel surface. However, the hand holding the handle should not move, and care should be taken to prevent the back handle from lifting, meaning the tail of the drill bit should not rise above the horizontal centerline of the grinding wheel, otherwise, it will dull the cutting edge and hinder cutting. This is the most critical step; the quality of the drill bit's sharpening is greatly related to this. When it is nearly done, start from the cutting edge and gently touch the back angle to make the back surface smoother. 5. Ensure the cutting tip is aligned with the axis, and symmetrically grind both sides slowly. After one side of the cutting edge is sharpened, grind the other side, ensuring that the cutting edge is centered on the drill bit's axis and that both sides are symmetrical. Experienced craftsmen will check the symmetry of the tip against the light and proceed with the grinding slowly. The back angle of the drill bit's cutting edge is generally between 10°-14°; if the back angle is too large, the cutting edge becomes too thin, causing severe vibration during drilling, resulting in triangular or pentagonal hole openings and needle-like chips. If the back angle is too small, the axial force during drilling is very high, making it difficult to penetrate, increasing cutting force, raising temperature significantly, and causing the drill bit to overheat severely, even making it impossible to drill. When the back angle is appropriately ground, the tip is centered, and both edges are symmetrical, the drill bit will discharge chips smoothly without vibration, and the hole diameter will not enlarge. 6. After sharpening both edges, pay attention to grinding the tip of larger diameter drill bits. After sharpening both edges, there will be a flat surface at the tip, affecting the centering of the drill bit. It is necessary to bevel the angle at the back of the cutting edge to minimize the flat surface at the tip. The method is to hold the drill bit vertically, align it with the corner of the grinding wheel, and bevel a small groove at the root behind the cutting edge. This is also an important point for centering the drill bit and ensuring smooth cutting. Be careful not to grind onto the main cutting edge while beveling the tip, as this will increase the front angle of the main cutting edge, directly affecting drilling. Of course, sharpening drill bits does not have a fixed formula; it requires accumulating experience through practical operation, comparison, observation, and repeated experimentation to achieve better sharpening results.

                                  The manual sharpening technique of twist drills

Twist drills are a commonly used drilling tool. Although their structure is simple, properly sharpening them is not an easy task. The key lies in mastering the sharpening methods and techniques. Once the methods are understood, the problems will be easily resolved. Here, I will introduce the manual sharpening techniques for twist drills.

The tip angle of a twist drill is generally 118°, but it can also be considered as 120°.
 
The main techniques for sharpening drill bits are as follows:
1. The cutting edge must be level with the grinding wheel surface.
Before sharpening the drill bit, the main cutting edge of the drill bit must be placed on the same horizontal plane as the grinding wheel surface. This means ensuring that when the cutting edge contacts the grinding wheel, the entire edge is ground. This is the first step in positioning the drill bit relative to the grinding wheel; once positioned correctly, slowly approach the grinding wheel surface.
2. The drill bit axis should be angled at 60° to the grinding wheel surface.
This angle is the cutting angle of the drill bit. If the angle is incorrect, it will directly affect the size of the drill bit's tip angle and the shape and angle of the main cutting edge. This refers to the positional relationship between the drill bit's axis and the surface of the grinding wheel; an angle of 60° is generally easy to gauge. It is important to pay attention to both the relative horizontal position and angle position of the drill bit before sharpening; both must be considered together. Do not neglect leveling the cutting edge for the sake of angle adjustment, or vice versa.
3. Grind from the cutting edge towards the back.
After the cutting edge contacts the grinding wheel, start grinding from the main cutting edge towards the back, meaning begin with the cutting edge of the drill bit contacting the grinding wheel, and then slowly grind down along the entire back cutting surface. When the drill bit enters, it can gently touch the grinding wheel, starting with a small amount of grinding, and pay attention to the uniformity of the sparks, adjusting the pressure on your hands in a timely manner. Also, ensure the drill bit is cooled; do not let it overheat, which can cause discoloration of the cutting edge and lead to annealing. If the temperature of the cutting edge is high, cool the drill bit promptly.
4. The cutting edge of the drill bit should move up and down, and the tail of the drill bit should not lift.
This is a standard grinding action for drill bits. The main cutting edge should move up and down on the grinding wheel, meaning the hand holding the front of the drill bit should evenly move the drill bit up and down on the grinding wheel surface. The hand holding the handle should not move, and care should be taken to prevent the back handle from lifting, meaning the tail of the drill bit should not rise above the horizontal centerline of the grinding wheel; otherwise, it will dull the cutting edge and hinder cutting. This is the most critical step, and the quality of the drill bit sharpening is greatly related to this. When it is nearly done, gently touch the back angle from the cutting edge to make the back smoother.
5. Ensure the cutting tip is aligned with the axis, and symmetrically grind slowly on both sides.
 
After one side of the cutting edge is sharpened, grind the other side, ensuring that the cutting edge is centered on the drill bit's axis, and both sides of the cutting edge are symmetrical. Experienced craftsmen will check the symmetry of the tip against a bright light and grind slowly. The back angle of the cutting edge is generally between 10°-14°. If the back angle is too large, the cutting edge becomes too thin, causing severe vibration during drilling, resulting in triangular or pentagonal hole openings and needle-like chips. If the back angle is too small, the axial force during drilling is very high, making it difficult to cut, increasing cutting force, raising temperature significantly, and causing the drill bit to overheat severely, even making it impossible to drill. When the back angle is appropriately ground, the tip is centered, and both edges are symmetrical, the drill bit will discharge chips smoothly without vibration, and the hole diameter will not enlarge.  
6. After sharpening both edges, pay attention to grinding the tip of the drill bit for larger diameters.
After sharpening both edges of the drill bit, there will be a flat surface at the tip, affecting the central positioning of the drill bit. It is necessary to chamfer the back of the cutting edge to minimize the flat surface at the tip. The method is to hold the drill bit upright, align it with the corner of the grinding wheel, and create a small groove at the root behind the cutting edge. This is also an important point for centering the drill bit and ensuring smooth cutting. Be careful not to grind onto the main cutting edge while chamfering the tip, as this will increase the front angle of the main cutting edge, directly affecting drilling.
Of course, sharpening drill bits does not have a fixed pattern; it requires accumulating experience through practical operation, comparison, observation, and repeated experimentation to achieve better sharpening results.

TAG:


RELATED INFORMATION

ADD

Gengguantun Industrial Development Zone, Qingxian County, Hebei Province, China

WeChat applet

WeChat applet

Business License