The basic sequence of bending sheet metal parts


Release time:

2020-09-12

【Summary】

                                                                                            What are the basic sequences for bending sheet metal parts?

(1) Bend from the inside to the outside;

(2) Bend from small to large;

(3) Bend special shapes first, then bend general shapes;

(4) The forming of the previous process does not affect or interfere with the subsequent process.

How to define the bending sequence of sheet metal?

In principle, it is to maximize the convenience of the operation of the next process.

That is:Easier to control product accuracy, better reliance on stops, simpler use of molds. Make product forming unobstructed.

When there are many bending times for sheet metal parts, how should the bending sequence be considered?

For example, if there is a sheet metal part that requires 8 bends according to the drawing, how should the bending sequence be considered?

1. Consider whether the bending machine's tool meets the drawing's R requirements.

2. Check whether the bending machine's lower blade or fixture blocks the position of the next bend.

3. Check whether the last bend will scrape or collide with the bending tool and fixture after this bend.

4. Check whether the last bend to be made will scrape or collide with the bending tool and fixture.

5. Check whether the size of the last bend can be used as a positioning reference for the next bend.

If none of the above situations exist, generally, bending can be done from the inside to the outside, considering that the edge to be bent first does not obstruct the next bending edge, then that bending edge should be done first. Also, each bending must meet the drawing's positioning reference to ensure the drawing's Size.

When bending sheet metal, how to analyze the order of multiple bends?

When bending multiple parallel bends, follow the principle of bending narrow first and then wide, to prevent the already bent sheet metal part from hitting the bending pressure tool.

When bending multiple vertical bends, follow the principle of bending long first and then short, to facilitate the adjustment of the bending pressure tool.

TAG:


RELATED INFORMATION

ADD

Gengguantun Industrial Development Zone, Qingxian County, Hebei Province, China

WeChat applet

WeChat applet

Business License